近场探头 - 三丰智合

TRD- 近场探头

The near-field probes offer excellent detection of internal corrosion, erosion, and axial cracking and return high-quality, amplitude-based signals that enable fast and simple data analysis. There is no need for a reference probe or extension. These probes are ideal for fin-fan carbon steel tube inspection.

Features

Ideal for carbon steel fin-fan tubes.
Excellent detection of internal corrosion, erosion, and axial cracking.
(Not recommended for detecting OD defects.)
No need for a reference probe or extension.
High-quality, amplitude-based signals.
Fast and simple data analysis.

Faster is better - Available for shortest delivery times

The probes listed below are regularly stocked for quick delivery. If the probe you need is not indicated, consult the "Alternate probe diameter" column in the diameter selection section to find an alternate probe diameter.

Part ID	Item Number	Diameter		Center Frequency (Hz)
-	-	mm	in.	-
TRD-160-300-N30	U8280227	16	0.630	300
TRD-170-300-N30	U8280086	17	0.669	300
TRD-180-300-N30	U8280112	18	0.709	300
TRD-240-300-N30	U8280377	22	0.866	300
TRD-280-300-N30	U8280241	28	1.102	300

Standard/Custom Probes (Made to Order)

Use the nomenclature and the chart below to configure your part number.

Chart TRD

Probe Type	Probe Diameter (use mm in part ID)		Center Frequency	Cable Length
Probe Type	-	mm	in.	-	-
TRD: Near field probe	Standard 11 mm to 31 mm by 1 mm Custom 32 mm to 100 mm ** by 1 mm	Standard 0.433 in. to 1.220 in. by 0.039 in. Custom 1.260 in. to 3.937 in. ** by 0.039 in.	300 (Standard)	20 m (65 ft) 30 m (100 ft)

_{** Probes with a diameter greater than 31.0 mm (1.220 in.) have a lightweight design and probe body made of plastic and two stainless sleeves (see picture above).}